How To Change A Fuel Filter On A 2006 Kia Sorento Youtube

How to Change the Fuel Filter on a Kia Sephia 1.8

by Grace Mclain

Mark Renders/Getty Images News/Getty Images

The fuel organisation on the Kia Sephia vehicles comes with a fuel filter that is connected to the fuel lines. As the gas leaves the gas tank and enters into the fuel lines, the gas will travel straight to the fuel filter. This is where the fuel cleansing process takes place. The inner filter inside of the fuel filter acts equally a strainer and catches and holds whatsoever sediments from the gas. The clean gas will then travel into the outlet fuel line and flow straight to the fuel injectors. Supervene upon the fuel filter between 50,000 and 75,000 miles.

Footstep 1

Park the Kia Sephia on a level surface and in a safe work area. Allow the engine to cool off for about 15 minutes.

Step 2

Walk dorsum to the rear of the Kia Sephia and remove the gas cap.

Footstep 3

Jack the back end of the Sephia up and position the jack stands underneath the designated jacking points on both sides of the car. By and large, the rear jacking points will be in front end of the rear wheels. Lower the machine onto the stands and get out the jack up.

Stride four

Clamber under the rear passenger side of the Sephia and locate the fuel filter. The fuel filter is located directly in forepart of the passenger-side rear wheel. The filter will be within of a bracket that is connected to the frame of the car. Fuel filters in 2000 and afterwards models of the Sephia will have three fuel lines; earlier models will have only two fuel lines.

Step v

Position the baste pan under the fuel filter. Using a clean rag, clasp the stop of the fuel lines and pull out on the fuel lines at the same time. The fuel lines are connected to the fuel filter past a small-scale plastic clip and when you compress the plastic clip, it unlocks from the fuel filter ports.

Step 6

Push the quondam fuel filter out of the subclass. If the old fuel filter is too tight to push out, utilise an open up-end wrench to remove the subclass bolt. And then, push the old fuel filter out of the bracket and discard the filter into the drip pan.

Step 7

Push the new fuel filter into the bracket with the pointer that is stamped on the side of the fuel filter pointing towards the front of the car.

Pace eight

Push the fuel lines straight onto the ports of the fuel filter. Then, carefully pull out on the lines just to make certain that they are secure.

Step 9

Slide the drip pan out from under the car and put the gas cap dorsum on. Get in the car and turn the key on and off ii or three times to fill the new filter with gas and remove air from the fuel system. Then, crank the engine. Look over the new fuel filter for leaks and then turn the engine off.

Jack the dorsum of the Sephia support and slide the jack stands out. Lower the Sephia back to the surface.

References

• "Kia Sephia and Spectra Haynes Repair Manual"; John Haynes; 2009

Tips

• The pointer on the side of the new fuel filter is at that place to guide yous in installing the new filter in the correct direction. Always call up that the arrow must bespeak towards the fuel line that is traveling to the engine and away from the fuel line that is traveling to the gas tank.

Things You'll Demand

• Jack
• Jack stands
• Drip pan
• Clean rags
• Open-end wrenches
• New fuel filter

Warnings

• Do not smoke around gas.
• Wear safety spectacles when changing a fuel filter.

Author Bio

Grace Mclain has been writing professionally since 1998. Her manufactures have appeared on eHow.com, Answerbag.com and LIVESTRONG.COM, and she specializes in automotive and business organisation topics. McIain has a professional writing document from JB Hunt in Little Stone, Ark.

More Articles

Source: https://itstillruns.com/change-filter-kia-sephia-18-6653542.html

Posted by: conefingir.blogspot.com

Share this post